Raspberry Pi Cam mount

Raspberry Pi 3 camera mount for camera similar to this [Link to Vendor](https://www.aliexpress.com/item/Camera-Night-Vision-with-150-Degree-Wide-Angle-5M-Pixel-1080P-Camera-Module-Also-for-Raspberry/32728981532.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10068_10171_10084_10083_10080_10304_10082_10081_10110_10137_10111_10302_10060_10112_10113_10155_10114_10154_438_10056_10055_10054_10310_10182_10059_100031_10099_10078_10079_10103_10073_10102_10052_10053_10142_10107_10050_10051,searchweb201603_2,ppcSwitch_5&btsid=d01ecd8a-5d1e-4f68-bf7f-2eb57f2c07cb&algo_expid=67db4c39-ff69-4a66-b54f-1bebf973f381-0&algo_pvid=67db4c39-ff69-4a66-b54f-1bebf973f381) . Camera should be slided into the fittings on the Outer part, flat cable is intended to fit through the gap in the front of the Outer part onwards to the backside and up on the gantry of the printer. You need 2x M3 screws and bolts.


If you like my design, please consider buying me a cup of coffee :)