Thingiverse
Raspberry Pi Camera C-mount lens adapter
door rpv
16
Downloads
14
Likes
0
Makes
This it's a camera enclosure/lens adapter for the rasperry pi.
The holder links are a "steal" from: https://www.thingiverse.com/thing:2875976
Printing recommendations
I printing this on PLA, 3 perimeters and 20% infill with a 0.4 nozzle at 0.2 layer. Only the raspberryCamA and raspberryCamA_h pieces requires support.
Hardware required:
4x M2x8 screws (with 2 it's ok too)
With a "industrial microscope lens" you can make a usable soldering microscope if you add a small monitor:
https://www.youtube.com/watch?v=zZSsvWWmNI0
Note: the lens adapter didn't have any thread, the thread pitch make this too small to print (I think), so I'm counting on the thread of the lens to be hold on the plastic, so this probably won't work on plastic body lens only on metal ones.
Note 2: the links will hold position only with small light lens, with a lens of the size of the first photo won't.
The holder links are a "steal" from: https://www.thingiverse.com/thing:2875976
Printing recommendations
I printing this on PLA, 3 perimeters and 20% infill with a 0.4 nozzle at 0.2 layer. Only the raspberryCamA and raspberryCamA_h pieces requires support.
Hardware required:
4x M2x8 screws (with 2 it's ok too)
With a "industrial microscope lens" you can make a usable soldering microscope if you add a small monitor:
https://www.youtube.com/watch?v=zZSsvWWmNI0
Note: the lens adapter didn't have any thread, the thread pitch make this too small to print (I think), so I'm counting on the thread of the lens to be hold on the plastic, so this probably won't work on plastic body lens only on metal ones.
Note 2: the links will hold position only with small light lens, with a lens of the size of the first photo won't.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!