Thingiverse

Raspberry Pi Camera CS Mount

von heidelboy1

6 Downloads

3 Likes

0 Makes

Adapter for CS Camera Mount on a raspberry pi camera

adapter: adapter for the cs mount to the objective (CS adapter 1 inch - 1/32 inch)
camera fixation: camera ist fixed on the part with 4 M2 screws
cover_tripod: Fixation of the whole system on a tripod and cover for disturbing light (0.25 inch - 1/20 inch)

Screw the camera on the camera_fixation and put the cover and the adapter arround the board with the camera. these are fixed with 4 M3 screws

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat