Raspberry Pi Camera Module 3 + HDMI Case

Raspberry Pi Camera Module 3 + HDMI Case

This is a casing designed to accommodate the new Camera Module 3, along with an HDMI adaptor board which allows the camera module to be extended up to 5 metres away from the raspberry Pi, using an off-the-shelf HDMI cable.

The Camera Module 3 is autofocus, so clearance has been designed into the case to allow the lens assembly to move.There is no facility on the camera lens to allow use of a manual focussing spanner.

The adaptor boards (supplied as pairs) are available from

https://shop.pimoroni.com/products/pi-camera-hdmi-cable-extension?variant=4585578945
(Preferred - also directly available from Petit Studios)

or

https://thepihut.com/products/raspberry-pi-camera-hdmi-cable-extension
(NOTE: The Arducam board has a 3.5mm jack socket which WILL need to be removed by desoldering otherwise it will not fit into the case as currently designed)

I designed it to be screwless, apart from the screws that come with the HDMI boards