Raspberry Pi Camera Module Adapter for Micro Four Thirds Mount.

Adapter for Raspberry Pi Camera Module with M43 Mount
====================
CAUTION:
-----------------------------------
DO THIS AT YOUR OWN RISK!
This may harm/destroy your Raspberry Pi camera module.

What you need?
-----------------------------------
Raspberry Pi Camera Module v2 (v1 should be okay but I didn't try.)
Lens or Telescope uses Micro Four Thirds mount. Camera Module Lens is attached as a screw. Turn the lens module counter clockwise then you can remove the lens.

How to use it
-----------------------------------
3D Print this thing and do this.
Please refer to pics in "How I Designed This" section, too.

### 1. Detach Lens from Raspi Camera.
Camera Module Lens is attached as a screw. Detach the lens module by rounding lens counter clockwise. Afterword, I recommend to re-attach the lens loosely so that you can remove it easily when finish.

### 2. Attach the camera
Put your camera module. See Pictures below.

### 3. Attach M43 Lens.
Depends on the