Raspberry Pi Camera Stream + Neopixelring light

INFO

This is a Raspberry Pi mount with the PiCam and a Neopixelring. Check it out in 3D: https://a360.co/3tnyUG7

Mount is from https://www.thingiverse.com/thing:2799628/

BOM

2 of 30mm m5 hexscrew
2 of m5 nut
4 of long m3 screw
4 of m3 hex locknut
2 of smal zipties
1 of Raspberry pi 3b+
1 of Neopixelring (16)
1 of RaspiCam
1 of USB-cable (powering)
3 of smal cables for GPIO Raspberry


WHAT TO PRINT
1 of each except "Pillars" that you need 4 of.


CONFIG THE RASPBERRY

Here's a good tutorial on how to get the camera stream up and running: https://www.instructables.com/How-to-Make-Raspberry-Pi-Webcam-Server-and-Stream-/

In order to get the neopixel ring to work you'll need to install the neccesary dependencies. Google "Neopixelring Raspberry pi" and you'll find good tutorials.

You'll then need to create a tiny python script that enables the neopixel. I run it at boot so it's always on when my machine is on.

The wiring is very simple; VIN to VIN, GR