Thingiverse
Raspberry Pi Case: Stackable (30mm Fan Support)
por AlanC88
46
Descargas
23
Likes
0
Makes
Hi,
This is an open bumper case for the Raspberry Pi which can be used for a single Pi or multiple.
There are 3 STL files - Top, Middle and Bottom.
Based on what stack you want you will need to print multiple 'Middle' sections. The stacks will lock in with the Pi screw holes to hold the Pi in place and fans can be attached above the pi or to the rear based on airflow / compact needs. If the fan is mounted to the top, there is still spacing to support a heatsink.
This case also provides support to connect a 30mm Pi Fan (https://www.amazon.co.uk/Camac-Brushless-Cooling-Screws-Raspberry/dp/B015W2KRCQ/ref=sr_1_1?ie=UTF8&qid=1489184536&sr=8-1&keywords=pi+fan)
I hope you enjoy.
Kind regards,
Alan
This is an open bumper case for the Raspberry Pi which can be used for a single Pi or multiple.
There are 3 STL files - Top, Middle and Bottom.
Based on what stack you want you will need to print multiple 'Middle' sections. The stacks will lock in with the Pi screw holes to hold the Pi in place and fans can be attached above the pi or to the rear based on airflow / compact needs. If the fan is mounted to the top, there is still spacing to support a heatsink.
This case also provides support to connect a 30mm Pi Fan (https://www.amazon.co.uk/Camac-Brushless-Cooling-Screws-Raspberry/dp/B015W2KRCQ/ref=sr_1_1?ie=UTF8&qid=1489184536&sr=8-1&keywords=pi+fan)
I hope you enjoy.
Kind regards,
Alan
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
