Slicer Discord
Raspberry pi case "the Cube" (NEXT remix) – 3D-printbaar model van Thingiverse Thingiverse

Raspberry pi case "the Cube" (NEXT remix)

door ReinV
1 Downloads
2 Likes
0 Makes
Model downloaden
This is "the Cube", a practical case for a raspberry pi 5 (4 and 3 will fit as well I think, but not tested) that allows several options.
It is a remix, if you like you can use the fins from the original design, to make it look like a NeXT computer, but I choose not to.

I made different fronts, a closed one, one that allows an I/O pin ribbon cable for controlling e.g. robots, and one that allows a flat cable for a camera module and/or PCIe. You can modify the front yourself to suit your needs. The fronts are easier to print compared to the original design, they can lay flat. I added some 3mm holes for the LEDs, which makes mounting (and glueing them in place) easier. Connect the LEDs (with resistor ofcourse) to PIN 2 or 4 (5V), PIN 6 (GND) and PIN 36 (ACTIVITY). You have to program PIN 36 (IO 16) yourself (you can choose any pin you like ofcourse, Pin 36 was suggested in the NEXT case design)
Note that the fronts are a very tight fit and maybe do not need the mounting option I added,
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, Polycarbonate
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie