Thingiverse
Raspberry Pi Cluster Rack
von Gixxerfast
21
Downloads
14
Likes
0
Makes
The is a remix of the Raspberry Pi 4 2U rack-mount bracket by Russross,
I have redesigned it for printabllity. There are now no bridges and it prints fine even in ABS/ASA.
Also, now there is room for the USB-cable to power the PI.
The Pi is mounted to the tray with four M2 self tapping screws (or just normal M2)
The printed parts consists of 12 main rack parts, 2 ears and 4 plugs. Also you print as many trays as you need.
As the original it uses four threaded M5 rods and if you buy two 1m rods you have enough.
I have redesigned it for printabllity. There are now no bridges and it prints fine even in ABS/ASA.
Also, now there is room for the USB-cable to power the PI.
The Pi is mounted to the tray with four M2 self tapping screws (or just normal M2)
The printed parts consists of 12 main rack parts, 2 ears and 4 plugs. Also you print as many trays as you need.
As the original it uses four threaded M5 rods and if you buy two 1m rods you have enough.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
