Raspberry Pi Logo Eco-Print Frame Case

This is a REMIX from the brilliant Raspberry Pi B+ Shell Case by Beaubasaur - kudos!!! :D

https://www.thingiverse.com/thing:939300

The reason I remixed it is to make it compatible with the Raspberry Pi 3b and 4b which have 4x GPIO pins for the POE hat board at the ports side of the GPIO rail, which required the frame to be lifted higher to clear those pins.

I also wanted to make it easier and more ecological to print, so, I shaved the 3d logo off flat to the frame to be able to print easier without supports and made the frame itself 4mm thick which was substantially thinner the original.

The original author of the frame suggested using 1.75mm filament as pins to close the top and base together which I thought was an amazing idea, until it would not hold or line up correctly as the holes were a little too big - so, I added plastic locator pins to the top of the case legs so they can sink into the base without the need to add my own pins after printing.

Everything is remi