Slicer Discord
Raspberry Pi Meteor System Camera Enclosure - MkIV – 3D-Druckmodell von Thingiverse Thingiverse

Raspberry Pi Meteor System Camera Enclosure - MkIV

von mjmazur
9 Downloads
3 Likes
0 Makes
Zum Modell
##System Overview
The Raspberry Pi Meteor System (RMS) is a low-cost, open-source/hardware project designed for citizen scientists and professional scientists alike. RMS combines the respectable processing power of the Raspberry Pi single-board computer (SBC) with an inexpensive IP camera module to create a meteor camera system rivaling (and often exceeding) the capabilities of professional systems that can cost upwards of 10x as much.

The system presented here is based on an IMX291 IP camera module with a 4 mm or 6 mm M16 lens, but can easily be modified to accommodate other modules like the IMX307 or even the larger IMX385.

##The Global Meteor Network (GMN)
At the present time, there are more than 300 RMS Stations operated by citizen-scientists in 22 countries around the world. Connected through the GMN, they have the long-term goal of characterizing the apparent point of origin in the sky (the radiant), total number, and size distribution of meteors entering our atmosphere.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen