Raspberry Pi NAS Case (e-Ink display remix)

This remix combines the two part case into one, adds an e-Ink display window with the Pimoroni InkyPHAT display, and adds additional mount points for 40mm case fans. All other files are the same, but they have been converted to STL for easier printing. This remix is subject to change as I make a more elegant back panel that fits the hardware I am using. Right now it's just a rectangle cutout as I work out the best way to enclose the cables. I will also add more detail to the assembly instructions as I go.

## Intro

This is a fairly easy project but it has a lot of steps. It’s also a bit expensive to produce given the price of the four SATA drives. You do not have to use the same components I used, but where you make changes, you’ll need to account for the differences. If you use cheaper drives, there should not be a significant difference in setup other than cost. I used the Samsung EVO 2tb SATA drives because I already had them for a different project. It does not fundamentally matt