Raspberry Pi NAS

This is my NAS project based on a Raspberry Pi (4 or 5) running openmediavault.

As this project is too complex as to describe here in a few lines how to build this NAS, you will find a comprehensive Instructable here: https://www.instructables.com/Raspberry-Pi-NAS/

**These were my design goals for the enclosure:**

*Cabling*

* Just only the power and network connectors should be accessible from the outside
* Both connectors are on the rear side and next to each other
* Avoid the 90 degree offset for power and network connectors which is typical for Raspberry Pi
* The USB connectors and cables must be all inside the case for a clean design

*Printing*

* There are only a few parts to print: the enclosure tray, device rack and side lid - optional: a stand
* Quick and easy printability is secondary to design - supports are mandatory for the enclosure tray
* A compact size which can be printed on a 200x200mm printer - no large format printer required
* Durable connections - melt-in bras