Slicer Discord
Raspberry Pi Pico case – 3D-Druckmodell von Thingiverse Thingiverse

Raspberry Pi Pico case

244 Downloads
166 Likes
0 Makes
Zum Modell
Raspberry Pi Pico case
I made this case since I ordered the Raspberry Pi Pico. I love it, because it has the functionality of an Arduino and the power of a Raspberry Pi.


Which parts
This thing has 2 options: with male headers and with female headers.

For the pico with female headers, you need the following parts:
. *Bottom_female.stl to be printed*
. *Top_female.stl to be printed*
. *headers to be cut off (https://nl.aliexpress.com/item/32847384633.html?spm=a2g0s.9042311.0.0.2dbe4c4dwlmwMY)*

And for male headers:
. *Bottom_male.stl*
. *Top_male.stl*
. *Headers to be cut off (https://nl.aliexpress.com/item/4001345538843.html?spm=a2g0s.9042311.0.0.2dbe4c4dwlmwMY)*

For both options, you need:
. *Form.stl*.
. *4x M1x5 countersunk screws (https://nl.aliexpress.com/item/32835837821.html?spm=a2g0s.9042311.0.0.27a44c4dxXRA28)*


Printing tips
The form can be printed with 0.4mm nozzle, but the top and bottom parts preferably with 0.3 or smaller (due to small
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen