Raspberry Pi Pico - PicoProbe case

I designed this 3D printed case to the Pi Pico with the PicoProbe software allowing me to hook up the wires for the SWD port, the Uart and the power VSYS/Gnd. I kept the SWD cables as short as possible and found out that aprx 8 cm works without a problem (remember there are also cables underneath the Pi Pico). In the case there is room for a 10 pins female header in which the cables with male pin headers soldered to them can be inserted.


More info at : https://www.ph2lb.nl/blog/index.php?page=raspberry-pi-pico