Slicer Discord
Raspberry Pi Pipboy – Modello 3D stampabile da MakerWorld MakerWorld
Electronics

Raspberry Pi Pipboy

774 Download
1.1k Likes
157 Makes
Vai al Modello
9/25/25Added my python script for the buttons to the documentation. Using the button wiring pdf you should have F1 connected to pin 11, F2 connected to pin 18, F3 connected to pin 13, F4 connected to pin 19, F5 connected to pin 26, Up connected to pin 29, Down connected to pin 33, Left connected to pin 37, and Right connected to pin 36. Ground pin 39 with a 10k ohm reistor connects to all of the other sides of the switches. I removed the gpio.py from the pypboy folder and added mine. I run it in it's own terminal window by typying: cd pypboy sudo python3 gpio.pyYou should see “Sent Key: Key.F1” or whichever for each button pressed. How to launch the gpio.py and the pipboy app:https://www.tiktok.com/t/ZP8SnPaeQ/ 9/18/2025Added the button wiring diagram to the documents. DISCLAIMERThis project is not for beginners. Do not start if you aren't confident wiring, soldering, or programming. The phyiscal parts of this project are complete but the programming is a work in progress. Part
Categoria
Electronics
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
stampa molto grande
Pezzo unico Potrebbe servire ridimensionamento
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 3/3
Post-lavorazione 0/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Piano min.
300 mm (Molto grande)
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

1 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione