Thingiverse
Raspberry Pi Rackmount Power Supply
door Makeitmore
2
Downloads
1
Likes
0
Makes
The Pi_PowerBottomRackmount is a remake of another project of mine (https://www.thingiverse.com/thing:4838640) which will describe the parts needed to build the power supply. I've since replaced this with something more powerful that incorporates power monitoring and the ability to toggle power to the Pis.
The Fiberoptic_Clip friction fits on the edge of a pi for connecting fiber cut from an old TOSLINK cable to act as light pipes. TOSLINK cables use plastic fiber so they are easy to cut.I sized the holes to friction fit the fiber with the thin jacket, but a little hot glue will hold the bare fiber in the holes. I drilled the holes in the decora face plate to pass the fiber through.
The decora_base_with_catch is a remake of (https://www.thingiverse.com/thing:4167265) with smaller holes to work directly with the screws that came with the 1U rackmount decora plate.
The Fiberoptic_Clip friction fits on the edge of a pi for connecting fiber cut from an old TOSLINK cable to act as light pipes. TOSLINK cables use plastic fiber so they are easy to cut.I sized the holes to friction fit the fiber with the thin jacket, but a little hot glue will hold the bare fiber in the holes. I drilled the holes in the decora face plate to pass the fiber through.
The decora_base_with_catch is a remake of (https://www.thingiverse.com/thing:4167265) with smaller holes to work directly with the screws that came with the 1U rackmount decora plate.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
