Raspberry Pi - Wisecoco 7" Screen Display Case

Information:I got tired of Amazon's Alexa Show displaying ads nonstop and not the information I needed. So I created my own version of it, and needed a stand. The stand was designed in Fusion on a 10 degree viewing angle, and open back slim build. I used a Raspberry Pi 5 in the build/photos. I used a scheduled shut down a few minutes before the smart plug to turn it off and on, on a schedule. The dashboard is a local webpage hosted on the device. Print in Place: No Required Hardware:1x Screen (Wisecoco): https://www.amazon.com/dp/B0BRMWMK6X1x Raspberry Pi: 3B, 3B+, 4, and 5 (check link for supported Pi models)4x Screws: M3 * 104x Nuts: M38x Washers: M3 Assembly:Assembling your Screen/Pi setup.Push the four screws through the front of the display.Place two washers on the inside of the displayPlace the screen on top of the washers. This can be skipped if you don't want the screen recessed.Place the nuts on the four ends and tighten to secure the screen. Boost MePi never looked th