Thingiverse
Raspberry Pi Zero cam case GoPro compatible
1
Download
3
Likes
0
Makes
There is a lot of cases for Raspberry Pi Zero (W) with camera, but I wasn't satisfied by anyone so I decided to design one by myself.
I've tested it with a V1.3 camera but should be compatible with the v2.
The cam is rotate 90° so there is no need to twist the flat cable.
There is a long double rod GoPro mount attach, so you can use with a compatible tripod.
I use this case with Raspberry Pi Zero W and MotionEyeOS for surveillance.
The Raspberry is kept in place by supports, there is no needs of screws inside the case. If you have the GPIO pins already soldered there is room even for those.
The back is fixed with 4 M2x10mm.
The version in the preview photos has been printed with a resolution of 0.28 but I suggest to use 0.20 for best results.
I've tested it with a V1.3 camera but should be compatible with the v2.
The cam is rotate 90° so there is no need to twist the flat cable.
There is a long double rod GoPro mount attach, so you can use with a compatible tripod.
I use this case with Raspberry Pi Zero W and MotionEyeOS for surveillance.
The Raspberry is kept in place by supports, there is no needs of screws inside the case. If you have the GPIO pins already soldered there is room even for those.
The back is fixed with 4 M2x10mm.
The version in the preview photos has been printed with a resolution of 0.28 but I suggest to use 0.20 for best results.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
