Raspberry Pi Zero HQ Camera Mounting Plate

Just a simple __mounting plate__ for the __Raspberry Pi Zero + HQ Camera webcam__.

I built the webcam following this [guide](https://github.com/geerlingguy/pi-webcam) by _Jeff Geerling_ (which in turn was inspired by _David Hunt's_ [blogpost](http://www.davidhunt.ie/raspberry-pi-zero-with-pi-camera-as-usb-webcam/) and _Justin Schuldt's_ [gist](https://gist.github.com/justinschuldt/36469e2a89d95ef158a8c4df091e9cb4)). All necessary hardware components and software instructions are already covered well by the guides. I found myself lacking a simple mounting plate for assembly though (the local vendor did not have one in stock). Hence, I quickly doodled one myself.

For everyone who does not want to look up the measures and/or avoid doodling, feel free to use this model.

What else is needed?
- 8x M2.5 screws
- 8x M2.5 nuts
- 8x M2.5 standoffs (I used 10mm excl. screw)

Assembly should be straightforward. The pictures should help too.