Raspberry PI Zero modified case

-- Raspberry PI Zero modified case --
G. Tielke, Sept. 19, 2021 (and updates)
Case for Raspberry Pi Zero, and camera.
Openings for GPIO and other device connections.

-- Modified Mar 2026: Version "V3" --
Modified further to better fit the Raspberry Version 3 camera. With that camera, the lens protrudes about 3mm from the front of the case.

The earlier versions were designed for the version 1 and 2 cameras. They did not work as nicely for the version 3 camera board

This is a remix of:
Raspberry PI Zero case GPIO and cam
by Pulpataro, May 15, 2018
https://www.thingiverse.com/thing:2912538

Which is turn is a remix of:
One Piece Raspberry Pi Zero + Camera Case (with GPIO)
by Superrei May 29, 2016
https://www.thingiverse.com/thing:1595429


Printed with PLA+ with 0.4 mm nozzle
220 degrees C nozzle, 60 degrees C glass plate
No supports needed - print with large flat side down
Speed 100 mm/s except first layer at 40 mm/s
10% infill
A smaller layer height like 0.12mm works best.