Raspberry Pi Zero NPR One Radio

https://youtu.be/0OiZ5_DXu78

***UPDATE*** Added speaker holes to the bottom of the enclosure.

This project uses a Raspberry Pi Zero to make an NPR One radio using the NPR One API.

Capacitive touch controls printed in Conductive PLA from Proto-pasta. The Adafruit MPR121 capacitive touch sensor is connected to wires with bare conductive paint.

The Pi Zero connects to the NPR One API and streams audio via WiFi. The Adafruit MAX98357 connects over I2S to give the Raspberry Pi Zero analog audio out.

Node JS Code on Github
https://github.com/adafruit/nprone-cli

Parts Wishlist
https://www.adafruit.com/wishlists/402061

Adafruit MAX 98357 I2S Class-D Amp
https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/overview

A360 Design Source:
http://a360.co/1TJcnvT

Learning guide:
https://learn.adafruit.com/raspberry-pi-zero-npr-one-radio/overview

The NPR logo is a registered trademark of NPR used with permission from NPR. All rights reserved.