Thingiverse
Raspberry Pi Zero Unicorn / WaveShare RGB PHAT case
door Collie147
1
Downloads
2
Likes
0
Makes
Initially I created this for a scrolling Teams Presence Indicator
https://youtu.be/S9SO0zd9BTM
And mashed some other peoples work together to make it work
https://github.com/Collie147/Teams-Presence
But the case can be used for anything really.
The case itself is based on https://www.thingiverse.com/thing:2625537 but tailored to fit a Raspberry Pi Zero and a Pimoroni Unicorn / WaveShare RGB LED Phat.
Two different options for the middle section whether you want to put in standoffs or print them as part of the case.
Option A "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (no-standoffs).stl" requires
4 x 2.5M 8mm standoffs,
4 x 2.5m nuts and
4 x 2.5m screws (6-10mm in length should do)
Option B "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (standoffs).stl" requires
4 x 2.5m nuts and
4 x 2.5m 18mm screws
https://youtu.be/S9SO0zd9BTM
And mashed some other peoples work together to make it work
https://github.com/Collie147/Teams-Presence
But the case can be used for anything really.
The case itself is based on https://www.thingiverse.com/thing:2625537 but tailored to fit a Raspberry Pi Zero and a Pimoroni Unicorn / WaveShare RGB LED Phat.
Two different options for the middle section whether you want to put in standoffs or print them as part of the case.
Option A "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (no-standoffs).stl" requires
4 x 2.5M 8mm standoffs,
4 x 2.5m nuts and
4 x 2.5m screws (6-10mm in length should do)
Option B "RPi Zero PiMoroniUnicorn-WaveShare LED PHAT - middle (standoffs).stl" requires
4 x 2.5m nuts and
4 x 2.5m 18mm screws
Collie147 publiceert ook op
13 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
