Raspberry Pi Zero W Camera w/Night Vision

This includes the parts required to mount a night vision camera for a Raspberry Pi Zero W, and run an OctoPrint setup, with camera, connected to printer, all contained within a single unit, on a tilt-adjustable Go Pro mount.

The camera tightly mounts into the chasis with the Raspberry Pi Zero W cable attached. The chasis bolts together with 4 - M3 bolts. The raspberry Pi zero W bolts in-place with 4 -M3 bolts and 4 M3 nuts. The Go-pro mount attaches with a M3 bolt and nut. Finally, the entire thing bolts to your chasis.

Wiring involves three cables. One cable to the printer, one cable to power, and the USB-OTG cable connects to the Raspberry Pi Zero W.

Parts Required:
2- M4 x 8 bolts
2- M4 nuts
1- m3 x 20 bolt
5- m3 nut
8- M3 x 8 bolts

Raspberry Pi Zero W $10: https://www.adafruit.com/product/3400
Raspbery Pi Night Vision Camera $26: https://www.amazon.com/gp/product/B0748KF97S
USB-OTG cable $7: https://www.amazon.com/Wireless-Micro-USB-Data-Transfer-connec