Raspberry Pi Zero Wall Charger Mount

UPDATE 2019-07-08
WARNING: This design needs tweaking. The plug sleeve is just barely too tight and the mounting pegs are just barely too big - resulting in a very difficult to install power adapter and a misaligned Pi Zero.
I discovered this once I actually ordered a print of it. I ended up filing inside the plug sleeve and using a razor on the pegs to make them smaller.
It could've been the print process itself causing some issues, but for good measure, I will end up re-measuring and making tweaks to those parts. I may also add a clip to the back of the Pi section to hold the cable behind it.
Be warned that if you print this out - you may have to modify it to fit.

=====================
2019-07-05

This is a wall charger mount for the Raspberry Pi Zero/W/WH - no lid
It will hold the Pi right on a standard iPhone usb charger (5V, 1A), expose it's GPIO headers for projects and sensors.

I have not included a clip in this design. I may add it later from the original source