Slicer Discord
Raspberry Pi2 Qidi Tech 1 Mount – 3D printable model from Thingiverse Thingiverse

Raspberry Pi2 Qidi Tech 1 Mount

by Brizzle
44 Downloads
23 Likes
0 Makes
Go to Model
This is a modification to the RPI2-Bottom_8020 Mount Made by 0110-M-P (http://www.thingiverse.com/thing:922740/#files). You can use any of the RPI2 Tops from him for this.

I stretched out the screw hole mounts to fit my Qidi Tech 1 for use as an OctoPrint Server. You will need 2 M4 x 10 screws to mount it. You should have some extra in the spare parts box that came with the printer.

Measurements between the two screw hole centers are 140mm. These are found on all corners of the Qidi Tech 1 so you have plenty of options. I chose the corner showed because that's where I want to mount my pi cam using this design http://www.thingiverse.com/thing:1667505 and a 12inch ribbon.
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection