Raspberry Pi5 with NVMe hat tool-less case

This is tool-less case designed to accommodate a Raspberry Pi5 with active cooler and a Pineberry HatDrive! bottom. Happy printing and assembly :) UPDATE: 1/20/2024 - added various top case optionsUPDATE: 1/22/2024Change the power button geometry to be much more robustUpdated the latches to make the two halves of the case fit much tighterTPU feet dimensions change to make them a very tight fit. Please take care when installing the TPU feet, they are meant to be very snug fit. Start with one corner of the stud and gently work the stud into the bottom of the case. Use a flat head screw drive to help work the feet into the case if needed. Case and power button print settings:Nozzle: 0.4mmLayer = 0.2mmInfill = 15%Brim = used only with power button for better stabilityPerimeters = 2Filament = PLAFoot print settings:Nozzle: 0.4mmLayer = 0.2mmInfill = 15%Perimeters = 2Filament = TPU (Overture TPU used) Once Pineberry HatDrive! bottom is assembled to the Raspberry Pi 5. Check and make sure the