Thingiverse
RaspberryPi 4 Case with Magnets
door qubit01
24
Downloads
11
Likes
0
Makes
I made a version of my RaspberryPi Case with magnets for the RaspberryPi 4. This is an improved version of my case for the Pi2/3 https://www.thingiverse.com/thing:688135, A+ https://www.thingiverse.com/thing:580757 or W https://www.thingiverse.com/thing:2403584
The RPi is held in with 2.5mm screws in the bottom shell. The screws are directly bolted into the plastic. I usually make sure that the holes fit the thread by drilling it with a 2.2 mm drill.
The top attaches to the bottom by 4 magnets. With that I am able to achieve that there is not a single screw, fastener, etc. on the outside of the case.
The magnets are 4mm in diameter and 4mm in height. I purchased mine from supermagnete.de with part number S-04-04-N
The RPi is held in with 2.5mm screws in the bottom shell. The screws are directly bolted into the plastic. I usually make sure that the holes fit the thread by drilling it with a 2.2 mm drill.
The top attaches to the bottom by 4 magnets. With that I am able to achieve that there is not a single screw, fastener, etc. on the outside of the case.
The magnets are 4mm in diameter and 4mm in height. I purchased mine from supermagnete.de with part number S-04-04-N
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
