RasPi Camera mount using Coolant Pipe

I based this "remix" off two other thingiverse designs:

The base is from https://www.thingiverse.com/thing:2598895, but I filled in the mounting holes and provided indentations on the back side for 15x3mm rare earth magnets to use to mount to the side of a 3D printer or other ferrous object.

The camera mount is from https://www.thingiverse.com/thing:4708849, except, I removed the arm and mounting bracket, and added a connector to the back for coolant pipe to be attached. I also modified the slits in the back to be an array of holes.

I used the TOPPROS Coolant pipe from Amazon (https://www.amazon.com/gp/product/B088QRKQYK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1). Some users claim it is not standard size. I don't know, but I do know that this camera mount popped right on and is snug.

When it's done, install a pair of 15x3mm rare earth magnets to the base with some CA glue and simply screw the threaded portion of the coolant pipe into the base. Then pop off the nozz