RATGDO Enclosure

This “thing” is an enclosure for the “RATGDO” module develop by Paul Wieland. Details about the RATGDO module an be found at https://paulwieland.github.io/ratgdo/. There have been several revisions to the module provided by Paul and I cannot say with certainty that this enclosure and its mounting points will match all revisions. The module I ordered and received in November 2023 is model 2.5i. The two mounting holes in the PCB are spaced 38mm apart. The PCB max dimensions were 46mm X 41mm. Please refer to the photos and drawings to make sure it will work with your particular revision.

The project was printed using PLA+ with a layer height of 0.3mm, using an infill of 15%. Four flanges at the base are provided for mounting using cable ties or screws.

The cover and PCB are secured to the base using M2x8, truss-head, self tapping, screws. If M3 screws are to be used, simply enlarge the mounting holes in the base.