rathian monster hunter

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Green Transmission Distance: 6 PLA PolyLite White Transmission Distance: 9This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #17 (1.44mm) swap to GreenBorder Only Colors from here until the end. At layer #20 (1.68mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #35 (2.88mm) swap to Green for the rest.