Ravenclaw Hueforge

Project: better ravenclaw.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Elegoo Blue Transmission Distance: 2.7 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Sunrise Orange At layer #17 (1.44mm) swap to Savannah Yellow At layer #19 (1.6mm) swap to White for the rest.