Thingiverse
Razer Core X Sled
door Ozpyn
0
Downloads
1
Likes
0
Makes
I found a Razer Core X (non-Chroma) on the side of the road, it was pretty dented and was missing a capacitor. These issues were easily remedied, however the internal plastic sled that allows the module to be inserted securely was obliterated.
This first version is very crude, the holes are slightly off, and only part 2 fits. But, it will get the job done.
Update: Measured Hole position and other dimensions with calipers, and make adjustments. Will work, but will likely be a tight fit.
When taking off the bottom rubber PLEASE be careful, the rubber rips very easily. To circumvent ripping I used rubbing alcohol as I peeled, applying liberally. (This will also save the adhesive.)
The existing screws for the sled I have measured to be M3x5mm with a T10 head. (There are 10 of these)
These parts are designed with M3 x 6 x 5mm Heat-Set inserts in mind. ( https://www.amazon.com/uxcell-Knurled-Insert-Female-Embedding/dp/B09MCXH78P/ref=sr_1_11?crid=2R919GVCBDZSY&keywords=m3+x+6+x
This first version is very crude, the holes are slightly off, and only part 2 fits. But, it will get the job done.
Update: Measured Hole position and other dimensions with calipers, and make adjustments. Will work, but will likely be a tight fit.
When taking off the bottom rubber PLEASE be careful, the rubber rips very easily. To circumvent ripping I used rubbing alcohol as I peeled, applying liberally. (This will also save the adhesive.)
The existing screws for the sled I have measured to be M3x5mm with a T10 head. (There are 10 of these)
These parts are designed with M3 x 6 x 5mm Heat-Set inserts in mind. ( https://www.amazon.com/uxcell-Knurled-Insert-Female-Embedding/dp/B09MCXH78P/ref=sr_1_11?crid=2R919GVCBDZSY&keywords=m3+x+6+x
Ozpyn publiceert ook op
12 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
