Thingiverse
Razor Knucks
par Zach307
108
Téléchargements
99
Likes
0
Makes
Original Designer: BiscuitsOnTheFloor
Modified By: Zach307
Hardware to Purchase:
• 4x: m3x0.5mm, 16mm Long Button Head Screw
• 4x: m3x0.5mm Locknuts
• 2x: m3x0.5mm, 6mm Long Button Head Screws
• 2x: m3x0.5mm Hex Nuts
• 3x: 6mm OD x 3mm Thick Magnets:
Parts to Print:
• 1x Handle
• 1x Blade Holder
• 2x Hex Link
• 2x Countersunk Link
Notes:
• Be sure to match the polarity of the magnets.
• You might have to drill out the magnet holes with a ¼” (6mm) drill bit.
• Superglue the magnets in place.
Adding a bit of Kleenex helps with the bond.
Modified By: Zach307
Hardware to Purchase:
• 4x: m3x0.5mm, 16mm Long Button Head Screw
• 4x: m3x0.5mm Locknuts
• 2x: m3x0.5mm, 6mm Long Button Head Screws
• 2x: m3x0.5mm Hex Nuts
• 3x: 6mm OD x 3mm Thick Magnets:
Parts to Print:
• 1x Handle
• 1x Blade Holder
• 2x Hex Link
• 2x Countersunk Link
Notes:
• Be sure to match the polarity of the magnets.
• You might have to drill out the magnet holes with a ¼” (6mm) drill bit.
• Superglue the magnets in place.
Adding a bit of Kleenex helps with the bond.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !