RBPan 35mm Panoramic Camera

Please read - this is an involved project and requires selection of other components, precise measurements, filament scaling/calibration, minor post processing and lens disassembly. See all notes below before continuing. This is the V1 of my panoramic camera project utilizing a Mamiya RB67 220 back. With this setup you can get ~14 24mm x 70mm panoramic photos from a standard 36 exp 35mm roll. No permanent modifications are required to the film back or lens and both can be returned to stock. I recommend using a stable filament that is resistant to high temperatures should you leave this in a hot car or for outdoor use. Parts Required Schneider Kreuznach 47mm lens (non-XL)Mamiya RB67 Pro-SD back (220 preferred)Minolta 50mm f1.7 MCExternal viewfinder (~25mm in 35mm f.o.v.)#4 screws (1" and 5/8" recommended)¼-20 nut for tripod35mm x 45mm x 0.1mm shims (McMaster 98089A244, 98055A342, or equivalent)35mm to 120 adapters (print files available elsewhere) Tools Requiredlens spannerph00,