RBS Track Clamp

This is a model for a track clamp to assist in making rolling ball sculptures. The file is parametric so the wire diameter and track width can be customized. The design used a 3d print as the clamp face and 1/2"X3/4"X1" OD 1/16" aluminum u channel for the top structure. The rest of the parts should be available from a hardware store. Part numbers listed are from McMaster-Carr.

1, 9001K339 1/2"X3/4"X1" OD 1/16" Wall Thickness Architectural 6063 Aluminum U-Channel
1, 95612A119 M5X0.8X16 Extra-Wide Flanged Button Head Screw
1, 97093A157 M5 5.1mm ID Wave Split Lock Washer
1, 94543A360 M5X.08 316 Stainless Steel Wing Nut
1, 3d Printed Part

Details in Clamp Drawing v1.pdf

Tools needed
Tools Needed
1.6mm or 1/16 drill bit
5.1mm or #7 drill bit
Coping Saw/Hack Saw or Angle Grinder