Thingiverse
RC AT802 CROP DUSTER
von Yeti_Engineering
10
Downloads
18
Likes
0
Makes
Tolerance test for AT802 tractor 3d printable crop duster RC plane.
Print normal parts first, if the fit is too loose increase the temperature of the LW-PLA so it expands more, you can also increase the extrusion width. If the fit is too tight sand edges and reduce LW-PLA temperature.
To assemble
Print all components
Allign flaperon into the wing
Push 1.75mm filament through the hole to create a hinge.
The hinge should be able to rotate freely
FULL PAID FILE AVAILABLE HERE
https://cults3d.com/en/3d-model/gadget/rc-at802-crop-duster-plane-1000mm-wingspan-v1
Print normal parts first, if the fit is too loose increase the temperature of the LW-PLA so it expands more, you can also increase the extrusion width. If the fit is too tight sand edges and reduce LW-PLA temperature.
To assemble
Print all components
Allign flaperon into the wing
Push 1.75mm filament through the hole to create a hinge.
The hinge should be able to rotate freely
FULL PAID FILE AVAILABLE HERE
https://cults3d.com/en/3d-model/gadget/rc-at802-crop-duster-plane-1000mm-wingspan-v1
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!