RC Boat

RC Boat

Dimensions of boat: approx. 57cmx27cm
Minimal printer volume: 165.5mmx140mmx170.8mm

Support required for: Body_part1, Rudder_part4 (other parts either do not require support or the support is part of the model)
Infill: 10% for both covers.

Printing material: PLA
glue: cyanoacrylate based (works for me)
finish: Acrylic spray paint - helps to make the floats waterproof (white on pictures)


Notes:
Coupler x4: I paused the print at 4.8mm height and inserted m3 nut in the coupler then resumed the print (be sure that the nut is completly covered in already printed part) . Feel free to glue the coupler to the float and the body instead. The reason for the nut is to have possibility to switch different body (i.e. screw instead of propeller) or replace a single float when something brakes.

Rudder: is mounted on hinge and holds in correct place by rubber (the idea is: if it hits something it should not brake the rudder or the whole body). If you do not want the hinge