RC Multi-Car

I designed this project as RC car with multi purpose usage.


The base of the RC is designed for classic 4xAA batterry holder, 9g servo and 2 DC motors with transmissions.

Whole steering set suspose to be mounted with 2/5/2,5mm bearings and 2mm pins.

There are some holes for optional lights around the middle case parts.

The top case part (of rc base) have two rails on side for hold optional "head" part (for now its designed as plate only), this head is hold in place by another 9g servo with "holder" part.

In head suspose to be another micro controller as slave in IC2 bus.

Here are all used additional components for full assembly (without small screws and pins):

Board Controller:
https://www.aliexpress.com/item/33011803738.html?spm=a2g0o.productlist.0.0.15435811kPQlha&s=p&algo_pvid=2ca7f2e8-001f-444a-9660-a324bd94fa38&algo_expid=2ca7f2e8-001f-444a-9660-a324bd94fa38-0&btsid=f9db8f3a-fa77-459f-ab65-b41c53a4cacc&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb20160