RC Plane Stand

Simple but solid stand for rc models.

Print settings:

All parts except belka.stl:
layer height: 0.2 mm
top/bottom layers: 3
outline/perimeter shells: 3
infill: 20%

belka.stl
layer height: 0.2 mm
top/bottom layers: 4
outline/perimeter shells: 4
infill: 50%

Supports are needed for parts: pokretlom.stl and pokretlod.stl

In addition to the printed parts you will also need:
6x M6 carriage bolt 30mm long
4x M6 carriage bolt 20mm long
10x M6 nut
2x 32mm (1 1/4 inch) outer diameter PVC tube 50cm long
thin sheet of foam rubber (from old mouse pad)