RC Sailboat Block - 11mm

11mm diameter sheave block designed for use on an rc sailboat.For assembly you will need the 3 printed parts along with a piece of filament and 150mm of line ~1mm in diameter.AssemblyFirst clear out the two small holes on both body parts so a piece of filament can be installed.place the sheave onto the peg of the one body part. This should spin on the peg. If it doesn't try sanding the ID of the sheave till it does.add the other body part. This will go over the peg and the 2 pieces of filamentlash the block together with the line. There is a picture guide of this process. The lashing is secured with a double stopper note on either end.Block has been tested up to 5kg.