Thingiverse
RC Switch Nut Key
par TheCovidian
11
Téléchargements
8
Likes
0
Makes
Here is a nut driver for those nuts on the transmitter switches.
The second key has a deeper chamfer in case the first key is not deep enough or you rip the lugs off over-tightening the nuts!
It should be deep enough to accept large switch paddles.
I printed it with .16 resolution but .2 samples don't show any difference. I suspect strength-wise the infill is the determining factor. My original samples were printed with 20% infill and seem to do the job, but if you need something stronger then I suggest more infill.
The second key has a deeper chamfer in case the first key is not deep enough or you rip the lugs off over-tightening the nuts!
It should be deep enough to accept large switch paddles.
I printed it with .16 resolution but .2 samples don't show any difference. I suspect strength-wise the infill is the determining factor. My original samples were printed with 20% infill and seem to do the job, but if you need something stronger then I suggest more infill.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
