RC6 Decoupler

==== THIS IS BETA VERION, MAY NOT FIT PROPERLY ====

Decoupler for GSO RC to reduce drag on mirror cell. Usable for heavy load image train. Prevents decollimation when telescope position change.

Steps to install:
1) dissasemble back plate and remove primary mirror;
2) reset primary mirror collimation screws;
3) put centering cap;
4) put decoupler on centering cap;
5) rotate decopuler, untill You see all collimation screws through holes;
6) drill 5,5mm diameter holes for screws via decouplers screw holes;
7) remove decoupler and centering cap;
8) thread the holes for M6x1;
9) screw the decoupler with 3x M6x1 screw;

Optionally You can drill 6mm holes and use washer and nut from inside.

You can also optionally laser-cut washer for decoupler from 1mm eva foam or similar product.

10) reassemble primary mirror and back plate;

11) collimate the telescope;

The prototype seems solid and holds tight, but use it at your own risk. I take no responsibility for any possi