RCBS Pro 2000 Compatible Plate Ring

This is a pretty fair modification from the original and I did this for a friend to try and help him get his press operational again. He was missing one of the springs too so those were replaced with paper clips as shown in the photo. I later added a fender washer and a split lock ring to those after the photo was taken. I used an M2.5x4 screw and I needed the washer and lock ring to take up some extra height as the back of the screw was coming through the insert. I used M2.5x2.5mm long brass inserts to hold the paper clips. Also if anyone wants to modify this you can find the design files here: https://cad.onshape.com/documents/5639235cb4d0187c955d1184/w/105042c4c27a9be3c08af27d/e/e1bcc663d56311b5b4f92558?renderMode=0&uiState=69cadccf6309d44b1e71df08