RCVR Field Charger

I designed this as a portable field charging station for LiPo batteries. In my case, I can use an AC power supply anywhere because my truck can supply AC power. I included a plug for the Power Supply in the event you would like to build a battery box in lieu of using an AC supply. I also included a couple of connecting arms and pin that I didn't use in my final design, but the connecting arm locations are left in the battery and charger tray in the event you would like to add reinforcements.

The battery tray is designed specifically to hold 4s and 6s quad size batteries. Holes are left on the back for USB cables which can be powered by the ISDT HS605air chargers.

This print requires no supports. I used 5% on the trays, and 50% on the carry handle and AC wire loom. The parts are too big to all fit on a 220x220 tray, so you'll need to print them 1x1. You might be able to print the handle and loom together.

► ISDT H605Air https://www.banggood.com/custlink/vGvEoQcDrP
► 24v 15a Po