MakerWorld
Hueforge & Lithophane
Ver Modelo
RE 3
0
Descargas
6
Likes
0
Makes
Project: RE v3.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 179x179mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Mistletoe Green Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Jade White At layer #11 (0.96mm) swap to Mistletoe Green At layer #12 (1.04mm) swap to Jade White At layer #15 (1.28mm) swap to Red At layer #21 (1.76mm) swap to Jade White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
