Thingiverse
Reciprocating Geneva
door mgg942
218
Downloads
202
Likes
0
Makes
This is a model illustrating the conversion of continuous rotary motion into reciprocating indexing motion.
It's a fairly complex model with 22 different parts and quite a few M3 x 10mm long button head cap screws. I used about 34. You could get away with fewer - or use even more, about another 6.
The model was inspired by a simulation example in SimLab Composer Mechanical v6.18
It was designed in Moi (Moment of Inspiration) simulated in SimLab Composer Mechanical and printed on an Ultimaker original (modified) in Diamond Age PLA
A video of the completed model is available here:https://youtu.be/rsHtbFcT21w
And a simulation of the concept here: https://youtu.be/dwXFKS28kUQ
It's a fairly complex model with 22 different parts and quite a few M3 x 10mm long button head cap screws. I used about 34. You could get away with fewer - or use even more, about another 6.
The model was inspired by a simulation example in SimLab Composer Mechanical v6.18
It was designed in Moi (Moment of Inspiration) simulated in SimLab Composer Mechanical and printed on an Ultimaker original (modified) in Diamond Age PLA
A video of the completed model is available here:https://youtu.be/rsHtbFcT21w
And a simulation of the concept here: https://youtu.be/dwXFKS28kUQ
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
