Record Clamp - 2 Styles

***UPDATE 4/8/2021***
SUGGESTION: Print the "SCREW COLLET" piece using Flexible PLA, TPU or similar "flexible type material."

I have, seemingly, solved the issue with the "Screw Collet" pieces being fragile and breaking. I now print the SCREW COLLET using "Flexible PLA." These flexible PLA printed SCREW COLLETS, seem to last much longer (have not had one break yet).
Have NOT tried TPU or other flexible material, but "assume" they will work as well. ALL other parts of Record Clamp should still be PLA or similar rigid material.


***UPDATE 1/19/2021***
ADDED FILE: Record_Clamp_Flat_Bottom_Label_PLate_SMALL_DIAM_01062021
DESC.: Reduced diameter "Label Plate" in the "Flat Bottom" style.

This Flat Bottom Label Plate has a 3.2" Diameter (81.28mm) vs the original Label Plate's 3.5" Diameter (88.9mm).

Had a user contact me stating his new AT33GTP/II cartridge was contacting the record clamp at the end of the record, reduced label plate at 3.2" (81.28mm) solved the problem.