Red and Orange Moth

Careful around the antennae when removing from plate as it is fragile. I recommend a scraper to free them up.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA Sunlu White Transmission Distance: 9 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Mandarin Orange At layer #21 (1.76mm) swap to White for the rest.