Red Clone Trooper Hue Forge

Red clone trooper hue forge. Recommend keeping the prime tower as the red likes to bleed into the white and make it pink. Project: Red Trooper helmet.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 176.25x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.7mm and the Actual Depth is 2.8mm Filaments Used: PLA Bambulab Matte Charcoal Transmission Distance: 0.3 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.9 Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Red At layer #14 (1.2mm) swap to Scarlet Red At layer #23 (1.92mm) swap to Ivory White for the rest.